A rubber plunger is a great investment for any homeowner to make. Plungers are inexpensive and effective tools that can help remove blockages from pipes and drains. Plungers are useful tools for your toilet, bathtub, shower, sink, or any other drain in your home.
Keep reading to learn how to properly use a plunger to help remove any clog or debris that is keeping your drains from working properly.
Whether you were going to be plunging a sink, tub, or toilet, there needs to be at least a little water in the basin. This will help create a vacuum seal between the plunger and the surface it will be coming in contact with.
If you are going to be plunging a toilet, and the water is already filled to the brim, you may need to use a bowl or bucket to remove some of this water. You will want to do this before you start plunging so that dirty water does not splash out all over the bathroom.
If you are going to be plunging a bathtub or sink, you need to locate the overflow hole. Next, you will need to take a wet rag and place it over the hole to prevent any air from getting in, creating a tighter section between the plunger and the drain you are working on.
After you have filler the basin up with a little bit of water, you can begin plunging. All you need to do is place the cup of the plunger over the drain and make sure that it creates a seal with the surface. Next, begin forcefully pushing the plunger up and down. You will need to repeat this about 15 to 20 times, or until the clog has been dislodged. You may even need to adjust the angle you are plunging at. After you are finished plunging, rinse the drain with hot water to finish the job. If you are happy with the results, rinse and disinfect the plunger before drying it and putting it away. That’s it!
If you’ve followed the steps detailed above only to find that your toilet or sink still isn’t draining water correctly, it may be time to call in a professional plumber. A pro will show up to your door equipped with all the necessarly tools and equipment needed to unclog your pesky sink or toilet. If the plumber needs to remove a fixture, open up a wall, or dig a whole to get to the clog in your drain, you can rest assured that he or she has the tool needed to get the job done right and on the first visit.
If you decide that hiring a plumber is the right course of action, here are a few tips for you to follow to make sure you hire a reputable company:
This guide on how to properly plunge a clogged drain is provided by ACE Home Services. To learn more about plunging a drain or to hire plumbers in Phoenix, Arizona to do so, please visit ACE online.
Termites are pervasive pests that can create havoc in whatever areas they invade. Termites are known to favour areas that…
A car insurance policy can be changed at any time under the portability feature available in car insurance plans. This…